To view the latest version of this file, see the readme at www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rad/601/html/J2C6012/readme_6012.html
This file is available in the following national languages:
| Brazilian Portuguese | Chinese - Simplified | Chinese - Traditional |
| French | German | Italian |
| Japanese | Korean | Spanish |
1.0 About this release
1.1 Product
fix history
2.0 Installation information
2.1 Hardware
requirements
2.2 Software
requirements
2.2.1 WebSphere®
Application Server
2.2.2
Resource adapters
3.0 Known limitations, problems, and
workarounds
4.0 Customer support
5.0 Notices and trademarks
The J2EE Connector (J2C) Architecture tools allow you to create J2EE applications that integrate and extend operations and data on existing Enterprise Information Systems (EIS).
This release contains fixes and applies maintenance to both IMS™ resource adapters included in Rational® Application Developer and Rational Software Architect. After applying the update:
The following fixes are included in this release of the J2EE Connector Tools Feature:
Modifications to both IMS resource adapters:
For information about installing the J2EE Connector Tools feature, refer to www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rad/60/install_instruction/J2C6012/install.html
Refer to the installation instructions for the hardware requirements for installing the J2EE Connector Tools feature.
You must have one of the following products installed before you can install this feature:
If you develop an application using the J2C tools and run it
on WebSphere Application Server Version 5, ensure that you have the
required maintenance applied to WebSphere Application Server Version 5.
Refer to Section
2.2.1 WebSphere Application Server for details.
Refer to the installation instructions for more details on
software and specifications that are supported by the J2EE Connector
Tools feature.
For details on software and specifications that are supported by a specific tool in Rational Application Developer or Rational Software Architect, refer to the online help.
WebSphere V5.0 and WebSphere V5.1 support J2C 1.0. The WebSphere Application Server service levels required to use the J2EE Connector Tools are listed in the table below. The back-level test environments available with Rational Application Developer or Rational Software Architect V6.0 require the service listed under WAS Distributed Service Level Required column in the table. WebSphere Application Server cumulative fixes, for example WAS 5.0.2.8, are available from the WebSphere Application Server support site (www.ibm.com/software/webservers/appserv/was/support). The Integration Edition RunTime Fixes for 5.0 and 5.1 are available from www.ibm.com/support/docview.wss?rs=180&context=SSEQTP&dc=D410&dc=D420&uid=swg24004796&loc=en_US&cs=utf-8&lang=en. WebSphere Application Server for z/OS® PTFs are available from the WebSphere Application Server for z/OS support site www.ibm.com/software/webservers/appserv/zos_os390/support/
| WebSphere Application Server | WAS Distributed Service Level Required | WAS for z/OS Service Level Required |
|---|---|---|
| 5.0.x |
|
W502023 (PTF
UK00329) |
| 5.1.x |
Integration Edition
RunTime Fixes for 5.1 |
W510205 (PTF UK0028) |
WebSphere V6 supports J2C 1.5 applications.
The following resource adapters are supported in the J2C tools:
The product home page for Rational Application Developer is www.ibm.com/software/awdtools/developer/application/. For FAQs, lists of known problems and fixes, and other support information, visit the support page at www.ibm.com/software/awdtools/developer/application/support/.
The product home page for Rational Software Architect is www.ibm.com/software/awdtools/architect/swarchitect/. For FAQs, lists of known problems and fixes, and other support information, visit the support page at www.ibm.com/software/awdtools/architect/swarchitect/support/.
© Copyright IBM Corporation 2000, 2005. All Rights
Reserved.
The XDoclet Documentation included in this IBM product is used with
permission and is covered under the following copyright attribution
statement: Copyright © 2000-2005, XDoclet Team. All rights
reserved.
Portions based on Design Patterns: Elements of Reusable
Object-Oriented Software, by Erich Gamma, Richard Helm,
Ralph Johnson and John Vlissides, Copyright © 1995 by
Addison-Wesley
Publishing Company, Inc. All rights reserved.
This information was developed for products and services offered in the
U.S.A. IBM may not offer the products, services, or features discussed
in this documentation in other countries. Consult your local IBM
representative for information on the products and services currently
available in your area. Any reference to an IBM product, program, or
service is not intended to state or imply that only that IBM product,
program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any IBM intellectual
property right may be used instead. However, it is the user's
responsibility to evaluate and verify the operation of any non-IBM
product, program, or service.
IBM may have patents or pending patent applications covering subject
matter described in this documentation. The furnishing of this
documentation does not give you any license to these patents. You can
send license inquiries, in writing, to:
IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.
For license inquiries regarding double-byte (DBCS)
information, contact the IBM Intellectual Property Department in your
country or send inquiries, in writing, to:
IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106, Japan
The following paragraph does not apply to the United
Kingdom or any other country where such provisions are inconsistent
with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION
PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OR CONDITIONS OF NON-INFRINGEMENT, MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer
of express or implied warranties in certain transactions, therefore,
this statement may not apply to you.
This information could include technical inaccuracies or
typographical errors. Changes are periodically made to the information
herein; these changes will be incorporated in new editions of the
publication. IBM may make improvements and/or changes in the product(s)
and/or the program(s) described in this publication at any time without
notice.
Any references in this information to non-IBM Web sites are
provided for convenience only and do not in any manner serve as an
endorsement of those Web sites. The materials at those Web sites are
not part of the materials for this IBM product and use of those Web
sites is at your own risk.
IBM may use or distribute any of the information you supply in
any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about
it for the purpose of enabling: (i) the exchange of information between
independently created programs and other programs (including this one)
and (ii) the mutual use of the information which has been exchanged,
should contact:
Intellectual Property Dept. for Rational Software
IBM Corporation
3600 Steeles Avenue East
Markham, Ontario
Canada L3R 9Z7
Such information may be available, subject to appropriate
terms and conditions, including in some cases, payment of a fee.
The licensed program described in this documentation and all
licensed material available for it are provided by IBM under terms of
the IBM Customer Agreement, IBM International Program License Agreement
or any equivalent agreement between us.
Any performance data contained herein was determined in a
controlled environment. Therefore, the results obtained in other
operating environments may vary significantly. Some measurements may
have been made on development-level systems and there is no guarantee
that these measurements will be the same on generally available
systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should
verify the applicable data for their specific environment.
Information concerning non-IBM products was obtained from the
suppliers of those products, their published announcements or other
publicly available sources. IBM has not tested those products and
cannot confirm the accuracy of performance, compatibility or any other
claims related to non-IBM products. Questions on the capabilities of
non-IBM products should be addressed to the suppliers of those products.
All statements regarding IBM's future direction or intent are
subject to change or withdrawal without notice, and represent goals and
objectives only.
This information contains examples of data and reports used in
daily business operations. To illustrate them as completely as
possible, the examples may include the names of individuals, companies,
brands, and products. All of these names are fictitious and any
similarity to the names and addresses used by an actual business
enterprise is entirely coincidental.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrates programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs.
Each copy or any portion of these sample programs or any derivative work, must include a copyright notice as follows:
© (your company name) (year). Portions of this code are derived from IBM Corp. Sample Programs. © Copyright IBM Corp. 2000, 2005. All rights reserved.
If you are viewing a soft copy of this information, the
photographs and color illustrations may not appear.
Programming interface information is intended to help you create application software using this program.
General-use programming interfaces allow you to write application software that obtain the services of this program's tools.
However, this information may also contain diagnosis, modification, and tuning information. Diagnosis, modification, and tuning information is provided to help you debug your application software.
Warning: Do not use this diagnosis, modification, and tuning information as a programming interface because it is subject to change.
The following terms are trademarks of International Business Machines Corporation in the United States, other countries, or both:
Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.
Windows® and Windows NT® are trademarks of Microsoft® Corporation in the United States, other countries, or both.
Intel® and Pentium® are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States, other countries, or both.
UNIX® is a registered trademark of The Open Group in the United States and other countries.
Linux® is a trademark of Linus Torvalds in the United States, other countries, or both.
Other company, product or service names, may be trademarks or service marks of others.