IBM Rational Rose Model Import Feature 6.0.1.5 - Installation instructions

For Rational Software Architect, Version 6.0.1.1, with Interim Fix 003, Rational Software Modeler, Version 6.0.1.1, with Interim Fix 003, or Rational Systems Developer, Version 6.0.1.1, with Interim Fix 003

This file is available in the English language only.

Contents

1.0 Overview

This document describes how to install or update the IBM^® Rational Rose^® Model Import feature by using IBM Rational^® Product Updater. You should use Rational Product Updater to install or update this feature directly from the IBM update server; however, you can also download the file with the extension .zip that contains this feature and then use Rational Product Updater to perform local installations or updates. The following sections describe how to install or update this feature.

2.0 Installation and update prerequisites

To install this feature directly from the IBM update server, you will require 10 MB of disk space. To download, extract, and install the interim fix, you will require 20 MB of disk space.

Before you can install or update this feature you must install Interim Fix 001, 002 and 003 for IBM Rational Software Architect 6.0.1.1, Interim Fix 001, 002 and 003 for IBM Rational Software Modeler 6.0.1.1, or Interim Fix 001, 002 and 003 for IBM Rational Systems Developer 6.0.1.1.

If you are installing from the IBM update server, or if you are installing from local update site with Interim Fix 001, 002, and 003 on it, you can install all Interim Fix's at the same time.

Installation instructions for Interim Fix 001for Rational Software Architect 6.0.1.1 are available at www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsa/60/install_instruction/6011_interim_fix003/install.html.

Installation instructions for Interim Fix 001 Rational Software Modeler 6.0.1.1 are available at www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsm/60/install_instruction/6011_interim_fix003/install.html.

Installation instructions for Interim Fix 001 Rational Systems Developer 6.0.1.1 are available at www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsd/60/install_instruction/6011_interim_fix003/install.html.

If you disabled any product features by modifying the feature.xml files or through the Update Manager by clicking Help > Software Updates > Manage Configuration, you must enable them before you install this feature.

3.0 Installing the feature

If you have already installed a previous version of this feature, you do not have to install the feature again. Please see section 4.0 Updating the feature for instructions that describe how to update this feature.

Install the feature with the same user account that installed the product.

Restrictions:

• The product cannot be open when you install this feature.
• On Windows^® operating systems, you must use an account with Administrator privileges. On Linux^® operating systems, you must log in as root.
• When you install the latest version of an interim feature, such as Rational XDE™ Model Import Feature 6.0.1.6, Rational Rose® Model Import Feature 6.0.1.5, or Rational DoDAF Modeling Feature 6.0.1.1.0.2, IBM Rational Product Updater (RPU) will automatically select Interim Fix 003 of the product. If you roll back Interim Fix 003, RPU will automatically select the Interim Feature for roll back. If you have a previous version of the Interim Feature installed and you roll it back to the previous version, you must also roll back Interim Fix 003 to Interim Fix 002. If you do not have an earlier version of the Interim Feature installed, you can leave Interim Fix 003 on your system after you roll back the Interim Feature.

To install the feature directly from the IBM update server, complete the following steps:

1. Start Rational Product Updater:
   • On Windows operating systems, click Start > Programs > IBM Rational > Rational Product Updater.
   • On Red Hat Enterprise Linux 3.0 (GNOME desktop environment), open the main menu and click Programming > Rational Product Updater.
   • On SuSE Linux Enterprise Server 9.0 (K Desktop Environment), open the main menu and click IBM Rational > Rational Product Updater.

   Note: On Red Hat Enterprise Linux 3.0 and SuSE Linux Enterprise Server 9.0, if you use a desktop environment other than the default, the product shortcuts might not appear in the default location.

2. Click Find Optional Features.

   If Rational Product Updater requires an update, you are prompted to install it before you can continue. Click OK. Rational Product Updater installs the update, restarts, and retrieves a list of available updates.

3. By default, all available features are selected. Ensure that you select IBM Rational Rose Model Import.

4. Click Install Features.

5. In the License Agreement window, read the license agreement and, if you accept the terms and conditions, click I accept the terms in the license agreement, then click OK.

After the installation is complete, Rational Product Updater lists the installed features on the Installed Products page.

6. Close Rational Product Updater.

4.0 Updating the feature

Update the feature with the same user account that installed the product.

Restrictions:

• The product cannot be open when you update this feature.
• On Windows operating systems, you must use an account with Administrator privileges. On Linux operating systems, you must log in as root.
• When you install the latest version of an interim feature, such as Rational XDE™ Model Import Feature 6.0.1.6, Rational Rose® Model Import Feature 6.0.1.5, or Rational DoDAF Modeling Feature 6.0.1.1.0.2, IBM Rational Product Updater (RPU) will automatically select Interim Fix 003 of the product. If you roll back Interim Fix 003, RPU will automatically select the Interim Feature for roll back. If you have a previous version of the Interim Feature installed and you roll it back to the previous version, you must also roll back Interim Fix 003 to Interim Fix 002. If you do not have an earlier version of the Interim Feature installed, you can leave Interim Fix 003 on your system after you roll back the Interim Feature.

To update the feature directly from the IBM update server, complete the following steps:

1. Start Rational Product Updater:
   • On Windows operating systems, click Start > Programs > IBM Rational > Rational Product Updater.
   • On Red Hat Enterprise Linux 3.0 (GNOME desktop environment), open the main menu and click Programming > Rational Product Updater.
   • On SuSE Linux Enterprise Server 9.0 (K Desktop Environment), open the main menu and click IBM Rational > Rational Product Updater.

   Note: On Red Hat Enterprise Linux 3.0 and SuSE Linux Enterprise Server 9.0, if you use a desktop environment other than the default, the product shortcuts might not appear in the default location.

2. Click Find Updates.

   If Rational Product Updater requires an update, you are prompted to install it before you can continue. Click OK. Rational Product Updater installs the update, restarts, and retrieves a list of available updates.

3. By default, all available updates are selected. Ensure that you select IBM Rational Rose Model Import.

4. Click Install Updates.

5. In the License Agreement window, read the license agreement and, if you accept the terms and conditions, click I accept the terms in the license agreement, then click OK.

After the installation is complete, Rational Product Updater lists the installed features on the Installed Products page.

6. Close Rational Product Updater.

5.0 Downloading the feature for local installations or updates

You should install or update the feature directly from the IBM update server as described above; however, it is also available for download. You might want to download the feature in the following situations:

• You have a slow or unstable Internet connection and want to use a download manager that can resume the download.
• You have difficulty accessing the live IBM update servers from behind a firewall.
• You prefer to download the feature and install or update it later.

To download and install or update the feature for Rational Software Architect, complete the following steps:

1. Download the feature from ftp://ftp.software.ibm.com/software/rationalsdp/rsa/60/zips/rsa601103_RMI6015.zip.
2. Extract the feature to a temporary directory, such as C:\temp.
3. For installation and update instructions, navigate to C:\temp\rsa\ and open install_local_rmi_6015.html.

To download and install or update the feature for Rational Software Modeler, complete the following steps:

1. Download the feature from ftp://ftp.software.ibm.com/software/rationalsdp/rsm/60/zips/rsm601103_RMI6015zip.
2. Extract the feature to a temporary directory, such as C:\temp.
3. For installation and update instructions, navigate to C:\temp\rsm\ and open install_local_rmi_6015.html.

To download and install or update the feature for Rational Systems Developer, complete the following steps:

1. Download the feature from ftp://ftp.software.ibm.com/software/rationalsdp/rsd/60/zips/rsd601103_RMI6015.zip.
2. Extract the feature to a temporary directory, such as C:\temp.
3. For installation and update instructions, navigate to C:\temp\rsd\ and open install_local_rmi_6015.html.

6.0 Installing features from a command line

You can install features from a command line so that you do not have to monitor or input information during the installation.

For more information about installing features from a command line, see Running Rational Product Updater from a command line in the product updater help.

7.0 Creating a local mirror of the update server

You might want to create a local mirror of the update server in the following situations:

• You administer a set of product installations and want to control which updates are available to users.
• You administer a set of product installations that do not have direct access to the Internet.

For instructions on how to create a local mirror of the Rational Software Architect update server, visit www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsa/60/local_mirror/6011/local_mirror.html.

For instructions on how to create a local mirror of the Rational Software Modeler update server, visit www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsm/60/local_mirror/6011/local_mirror.html.

For instructions on how to create a local mirror of the Rational Systems Developer update server, visit www3.software.ibm.com/ibmdl/pub/software/rationalsdp/rsd/60/local_mirror/6011/local_mirror.html.

8.0 Uninstalling the feature

Uninstall the feature with the same user account that installed the product.

Restrictions:

• The product cannot be open when you uninstall this feature.
• On Windows operating systems, you must use an account with Administrator privileges. On Linux operating systems, you must log in as root.

To uninstall the feature, complete the following steps:

1. Start Rational Product Updater:

   • On Windows operating systems, click Start > Programs > IBM Rational > Rational Product Updater.
   • On Red Hat Enterprise Linux 3.0 (GNOME desktop environment), open the main menu and click Programming > Rational Product Updater.
   • On SUSE Linux Enterprise Server 9.0 (K Desktop Environment), open the main menu and click IBM Rational > Rational Product Updater.

   Note: On Red Hat Enterprise Linux 3.0 and SUSE Linux Enterprise Server 9.0, if you use a desktop environment other than the default, the product shortcuts might not appear in the default location.

2. Click the Rollbacks tab. An inventory of installed product updates and features is displayed on the Rollbacks page.

3. Select IBM Rational XDE Model Import.

   Dependencies between updates are enforced automatically. If you select to roll back an update on which other installed updates depend, the dependent updates are also selected to roll back.

4. Click Roll Back Updates.

5. Close Rational Product Updater.

9.0 Customer support

When you contact customer support, the support representative will require the versions of the installed products or interim features on your system.

1. Start IBM Rational Product Updater:
   • If the product is running, click Help < Software Updates > IBM Rational Product Updater.
   • On Windows operating systems, click Start > Programs > IBM Rational > Rational Product Updater.
   • On Red Hat Enterprise Linux 3.0 (GNOME desktop environment), open the main menu and click Programming > Rational Product Updater.
   • On SUSE Linux Enterprise Server 9.0 (K Desktop Environment), open the main menu and click IBM Rational > Rational Product Updater.
2. Click the Installed Products tab.

For FAQs, lists of known problems and fixes, and other support information, visit the product support page for Rational Software Architect at www.ibm.com/software/awdtools/architect/swarchitect/support/index.html. For product news, events, and other information, visit the product home page for Rational Software Architect at www.ibm.com/software/awdtools/architect/swarchitect/.

For FAQs, lists of known problems and fixes, and other support information, visit the product support page for Rational Software Modeler at www.ibm.com/software/awdtools/modeler/swmodeler/support/index.html. For product news, events, and other information, visit the product home page for Rational Software Modeler at www.ibm.com/software/awdtools/modeler/swmodeler/.

To determine the versions in Rational Systems Developer, complete the following steps:

1. Start IBM RSD Product Updater:
   • If the product is running, click Help > Software Updates > IBM RSD Product Updater.
   • On Windows operating systems, click Start > Programs > IBM Rational Systems Developer V6.0.1 > IBM RSD Product Updater.
   • On Red Hat Enterprise Linux 3.0 (GNOME desktop environment), open the main menu and click Programming > IBM RSD Product Updater.
   • On SUSE Linux Enterprise Server 9.0 (K Desktop Environment), open the main menu and click IBM Rational Systems Developer V6.0.1 > IBM RSD Product Updater.
2. Click the Installed Products tab.

For FAQs, lists of known problems and fixes, and other support information, visit the product support page for Rational Systems Developer at www.ibm.com/software/awdtools/developer/systemsdeveloper/support/index.html. For product news, events, and other information, visit the product home page for Rational Systems Developer at www.ibm.com/software/awdtools/developer/systemsdeveloper/.