Statemate version 4.5 readme

IBM Corporation
01 November, 2008

 

 

© Copyright IBM Corporation 1989, 2008
U.S. Government Users Restricted Rights - Use, duplication, or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

This file contains last-minute product information and updates to Statemate 4.5

It is divided into the following sections:

·         System requirements

·         Compatible products

·         Installing Statemate 4.5

o        New Installation

o        Upgrade Installation

·         What's new in version 4.5

·         Known problems

o        Compiling Generated Code for dSpace

o        Compiling MicroC Generated Code for Softune

For the latest news and information on Statemate, visit the website at http://www.ibm.com/software/rational/support/.

System requirements

To run Statemate 4.5 you need:

  • One of the following operating systems installed on your computer:
    • Sparc Solaris 2.8/2.9/2.10 with one of the following Windowing systems:
      • CDE
      • OpenWindows: 3
      • Motif
    • Windows XP SP2 with one of the following X-Servers Installed:
      • X-Vision
      • MKS X/Server
  • The system requirements for Windows:

The recommended memory (RAM) for Windows is 256 MB.
When working with large models on Windows platforms, you should allow more memory
to enhance tool performance.
When working with models that contain 200 or more charts and 2500 or more dictionary elements
(textual elements), allow at least 1 GB of physical memory.

For additional information on system requirements, including recommended configurations, visit the Support Web site.

At the time of writing, the third party products tested with Statemate 4.5 are: -hidden

For the latest information about third party products that are supported with Statemate, visit the Support Web site. -hidden


Compatible products

  • Adobe Acrobat Reader 6.0 or newer
  • CANoe V3.0
  • ClearCase V3.1.1
  • Continuous 4.5
  • DOORS 5.2 (Solaris only)
  • DOORS 8.1 (Windows Systems)
  • dSPACE (models 1102 & 1103)
  • dSPACE ControlDesk 1.2 P2
  • FlexNet v 11.5.0.0
  • FrameMaker 7.0
  • PVCS Version Manager v6.7.00 (Build 894)
  • QNX V4.24
  • VxWorks: 5.3 (Kernel WIND 2.5; Tornado 1.0.1)
  • WATCOM C/C++ compiler V11.0
  • Word 97/2000
  • GNAT ADA version 2.8.1 (Solaris)


Installing Statemate 4.5

New Installation

See the Statemate Installation Guide found on the CD.

Upgrade Installation

To upgrade from a version prior to 4.3, a new license is required. For more information,
see Obtaining a license.
Before installing, it is recommended that you check in and unlock all configuration
items in all workareas.
For more information, see the Statemate Administrator’s Guide and Statemate
Installation Guide, found on the CD.


Obtaining a license for Statemate

Statemate uses Telelogic Lifecycle Solutions licensing. - hidden
For more details about obtaining a license, please see “TLS_licensing_guide”. - hidden
The file can be found on the distribution CD, under “license_server_windows_1.3” - hidden
directory for Windows, and under “license_server_1.3” directory for Solaris. – hidden
For details about obtaining a license, please refer to Statemate customer support.


What's new in version 4.5

  • Dataport / Documentor Enhancements
    • New Dataport APIs
      • stm_r_if_consists
        stm_list stm_r_if_consists(stm_id if_id, int *status)
        A new Dataport API function was added to allow retrieval of element names in
        ‘consists of’ of Info Flow

        Function Parameters:
        • if_id - Info Flow element id
        • status - (out parameter) - can return the following:
                    – stm_success
                    – stm_id_not_found
                    – stm_id_out_of_range
        Return Value:
        List of Strings containing the names of the elements and fields in the Info Flow

      • stm_init_uad_for_stm_dll
        stm_boolean stm_init_uad_for_stm_dll(char *proj,char *work_area,
                             stm_transaction self_trans, int *status)
        A new Dataport API function was added to allow initializing Dataport from a DLL used
        by Statemate.
        Function Parameters:
        • proj - Project Name
        • work_area - Workarea path
        • self_trans - Select user transaction control / automatic transaction control
        • status - (out parameter) - can return the following:
                    – stm_success
                    – stm_no_updated_pmdb
                    – stm_no_updated_projdb
                    – stm_no_legal_operator
                    – stm_deadlock
                    – stm_not_member_of_project
                    – stm_nonexistent_project
                    – stm_empty_file_of_licensed_host
                    – stm_no_file_of_licensed_host
                    – stm_cannot_chdir_to_work_area

    • New Documentor APIs
      • New Function : STM_R_IF_CONSISTS(IN if: INFORMATION_FLOW, OUT st: INTEGER): LIST
                   OF STRING;
        New Documentor API was added to allow retrieval of element names in ‘consists of’
        of an Information Flow.


Known problems

Compiling Generated Code for dSPACE

The stm_ds1102.lk file, required when linking generated code for DS1102, is no longer
supplied with the Statemate installation.
Please refer to the DS1102_readme.txt file under $STM_ROOT\etc\rapid\ds1102 for further information.

Compiling MicroC Generated Code for Softune

The file Start905s_souftune.asm was removed from the following locations in the
installation:
$STM_ROOT\etc\CTD\mainloop_sc_ext
$STM_ROOT\etc\CTD\mainloop_sc
$STM_ROOT\Demo\PingPongDemoKitWA\prt\pp_ffmc16_softun
When using the targets: ml_ext_FFMC16_Fujitsu_softune,
ml_FFMC16_Fujitsu_softune, the file start905XXX.asm needs to be copied from the
Softune installation in order to build the application.


Fixed problems

For details of problems that have been resolved in Statemate 4.5, visit the support center on the Support Web site.

To access the list of fixed defects, do the following:

1. Log in to the support site
2. Select Statemate in the product selection box
3. Go to Release Notes section.
4. Go to Statemate 4.5 - Defects Fixed List and click Download

Contact Support

Support and information for Telelogic products is currently being transitioned from the Telelogic Support site to the IBM Rational Software Support site. During this transition phase, your product support location depends on your customer history.

·         If you are a heritage customer, meaning you were a Telelogic customer prior to November 1, 2008, please visit the Telelogic Statemate Support site.

Telelogic customers will be redirected automatically to the IBM Rational Software Support site after the product information has been migrated.

·         If you are a new Rational customer, meaning you did not have Telelogic-licensed products prior to November 1, 2008, please visit the IBM Rational Software Support site.

 

Notices

This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.

IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send written license inquiries to:

IBM Director of Licensing
IBM Corporation
North Castle Drive
Armonk, NY 10504-1785
U.S.A.

For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send written inquiries to:

IBM World Trade Asia Corporation
Licensing
2-31 Roppongi 3-chome, Minato-ku
Tokyo 106-0032, Japan

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions. Therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.

IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:

Intellectual Property Dept. for Rational Software
IBM Corporation
1 Rogers Street Cambridge,
Massachusetts 02142
U.S.A.

Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.

The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.

Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.

This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.

If you are viewing this information softcopy, the photographs and color illustrations may not appear.

Trademarks

IBM, the IBM logo, ibm.com, Telelogic, Telelogic Synergy, and Telelogic Change are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. These and other IBM trademarked terms are marked on their first occurrence in this information with the appropriate symbol (® or ™), indicating US registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at www.ibm.com/legal/copytrade.html.

Linux is a registered trademark of Linus Torvalds.

Macrovision and FLEXnet are registered trademarks or trademarks of Macrovision Corporation.

Microsoft, Windows, Windows 2003, Windows XP, Windows Vista, and/or other Microsoft products referenced herein are either trademarks or registered trademarks of Microsoft Corporation.

Mozilla and Firefox are trademarks of the Mozilla Foundation.

Oracle is a registered trademark of Oracle Corporation.

Red Hat is a registered trademark of RedHat, Inc.

Sun, Sun Microsystems, Solaris, and Java are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries.

Other company, product or service names mentioned may be trademarks or service marks of others.